Marine & Outdoor Products HAL-LOCK Outrigger Pulley – Double – 6in

The HAL-LOCK outrigger pulley is a specially designed product that offers both speed and efficiency. In addition to its functionality, it also has an appealing appearance. Using this pulley is incredibly simple – just pull the locking lever back and the halyard will be securely held in place by the softer urethane insert. It's that easy! Not only does HAL-LOCK make the process faster, but it also reduces the amount of tension required on the shock cord. This means that it takes less effort to raise and lower the clip. Gone are the days of setting up elaborate configurations using rubber bands, wire, and swivels, which can be both unsafe and ineffective. HAL-LOCK takes care of everything, ensuring a safer, more efficient, and easier experience. The sizes available (6, 9, and 12) refer to the length of the shock cord and the snap on the different models.

Frequently Asked Questions

1. How do I install the HAL-LOCK outrigger pulley?

Installing the HAL-LOCK outrigger pulley is quick and easy. Simply attach it to your outrigger, making sure the locking lever is in the open position. Then, feed the halyard through the pulley and snap it closed. Pull the locking lever back to secure the halyard in place. That's it – you're ready to go!

2. Can I use the HAL-LOCK outrigger pulley with any size outrigger?

Yes, the HAL-LOCK outrigger pulley is designed to be compatible with outriggers of all sizes. Whether you have a 6ft outrigger or a 12ft outrigger, the HAL-LOCK pulley will work effectively.

3. Is the HAL-LOCK outrigger pulley suitable for all types of boats?

Yes, the HAL-LOCK outrigger pulley is suitable for use on a variety of boats, including fishing boats, sport boats, and recreational boats. It is designed to withstand the harsh marine environment and provide reliable performance.

4. Does the HAL-LOCK outrigger pulley require any maintenance?

The HAL-LOCK outrigger pulley is made from high-quality materials that require minimal maintenance. However, it is recommended to rinse the pulley with fresh water after each use to remove any salt or debris. Additionally, periodically check the locking lever and urethane insert for any signs of wear and tear, and replace if necessary.

5. Can I use the HAL-LOCK outrigger pulley with other rigging accessories?

Yes, the HAL-LOCK outrigger pulley is compatible with a wide range of rigging accessories. It can be used with shock cords, clips, and other types of outrigger rigging components. Its versatile design allows for easy integration into your existing rigging setup.