The Garmin P79 600W In-Hull Transducer is an entry level transducer designed for easy installation. With an adjustable deadrise angle, it can easily conform to the contour of your boat's hull, ensuring a secure fit.
Operating at a frequency range of 50 to 200 kHz, this transducer provides reliable performance. Its beamwidth of 45 to 12 degrees offers a wide coverage area, enhancing your fishing experience. With a depth range of 800 to 1,200 feet, you can confidently explore various fishing environments.
Please keep in mind that this transducer is specifically designed for 8-pin systems. If your Garmin sounder has a 6-pin configuration, you will need to use a transducer adapter cable (part number 010-11612-00) to connect the transducer.
The transducer kit includes detailed installation instructions. It is crucial to follow these instructions carefully to ensure proper installation and avoid any damage to your boat. For optimal performance, this transducer is recommended for use on fiberglass hulls that are no more than 5/8″ thick. It is not recommended for use on cored hulls.
It is essential to note that this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more detailed information about these chemicals, please visit the P65Warnings.ca.gov website.
Frequently Asked Questions (FAQs)
Q: What is the frequency range of the Garmin P79 In-Hull Transducer?
A: The Garmin P79 In-Hull Transducer operates at a frequency range of 50 to 200 kHz.
Q: What is the depth range of this transducer?
A: The Garmin P79 In-Hull Transducer has a depth range of 800 to 1,200 feet.
Q: What is the beamwidth of the transducer?
A: The beamwidth of the Garmin P79 In-Hull Transducer ranges from 45 to 12 degrees.
Q: Can I use this transducer with a 6-pin Garmin sounder?
A: No, if you have a 6-pin Garmin sounder, you will need to use a transducer adapter cable (part number 010-11612-00) to connect the transducer.
Q: Is this transducer suitable for cored hulls?
A: No, the Garmin P79 In-Hull Transducer is not recommended for use on cored hulls. It is best suited for fiberglass hulls that are no more than 5/8″ thick.
Q: Are installation instructions included with the transducer kit?
A: Yes, the transducer kit comes with detailed installation instructions to guide you through the installation process.
Annalisa –
Gabino –