The XPTH-9-HW-T Dual Spectrum CHIRP Plastic Thru-Hull Transducer is designed for use with Humminbird products. It supports Dual Spectrum CHIRP 2D sonar with a high frequency beam and wide cone angle, allowing for a CHIRP range of 150-220kHz and a maximum depth of 1200ft. This transducer also includes a built-in temperature sensor and features a rugged composite design. It comes with a 30′ cable for easy installation.
This transducer is compatible with the following Humminbird products:
– HELIX 5 CHIRP G2 (gps-equipped models only)
– HELIX 7 CHIRP G2/G3 (GPS-equipped and CHIRP DI G2 models)
– HELIX 7 CHIRP G2N/G3N (All models)
– HELIX 8 CHIRP G3N (All models)
– HELIX 9 CHIRP G2N/G3N (All models)
– HELIX 10 CHIRP G2N/G3N (All models)
– HELIX 12 CHIRP G2N/G3N (All models)
– ICE HELIX CHIRP G2 (All models in Open Water Mode)
It's important to note that Side Imaging and Down Imaging units can only support the XPTH 9 HW T as a 2D sonar transducer and not for Side Imaging or Down Imaging.
The Dual Spectrum CHIRP Frequencies available are:
– Full: 150-220 kHz
– Narrow: 180-240 kHz
– Wide: 140-200 kHz
The maximum depth capability of the Dual Spectrum CHRIP is 1200ft (365m).
Please be aware that this product contains chemicals, such as LEAD, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit P65Warnings.ca.gov.
Frequently Asked Questions
1. Is the XPTH-9-HW-T transducer compatible with all Humminbird products?
No, the XPTH-9-HW-T transducer is compatible with specific Humminbird products. It is compatible with the following models: HELIX 5 CHIRP G2 (GPS-equipped models only), HELIX 7 CHIRP G2/G3 (GPS-equipped and CHIRP DI G2 models), HELIX 7 CHIRP G2N/G3N (All models), HELIX 8 CHIRP G3N (All models), HELIX 9 CHIRP G2N/G3N (All models), HELIX 10 CHIRP G2N/G3N (All models), HELIX 12 CHIRP G2N/G3N (All models), and ICE HELIX CHIRP G2 (All models in Open Water Mode).
2. Can the XPTH-9-HW-T transducer be used for Side Imaging and Down Imaging?
No, the XPTH-9-HW-T transducer is not compatible with Side Imaging and Down Imaging units. It can only be used as a 2D sonar transducer.
3. What are the available frequencies for the Dual Spectrum CHIRP?
The Dual Spectrum CHIRP frequencies available are: Full (150-220 kHz), Narrow (180-240 kHz), and Wide (140-200 kHz).
4. What is the maximum depth capability of the XPTH-9-HW-T transducer?
The XPTH-9-HW-T transducer has a maximum depth capability of 1200ft (365m).
5. Does the XPTH-9-HW-T transducer come with a temperature sensor?
Yes, the XPTH-9-HW-T transducer includes a built-in temperature sensor.
Brenden –
Delmar –