Adhesive Lined Heat Shrink Tubing (ALT) – 1/2″ x 3″ – 3-Pack – Red
Package of 3 Red 3″(7.6cm) long sections with a 1/2″(12.7mm) diameter that shrinks to 5/32″(4mm)
Wire Range: 8-4 AWG
Features:
- Cross-Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
- Heat-activated adhesive lining provides an impervious seal to salt water, oil, acids, and sunlight, as well as providing strain relief
- Highest shrink ratio – shrinks to 1/3 its original size
- Shrinks at 257°F / 125°C
- Operating temperature range of -40°C to 110°C
- CUL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to P65Warnings.ca.gov.
FAQs
What is the diameter of the Ancor Heat Shrink Tubing?
The Ancor Heat Shrink Tubing has a diameter of 1/2″ (12.7mm) before shrinking.
How long does the Ancor Heat Shrink Tubing shrink to?
The Ancor Heat Shrink Tubing shrinks to a length of 5/32″ (4mm) when heated.
What is the wire range for the Ancor Heat Shrink Tubing?
The wire range for the Ancor Heat Shrink Tubing is 8-4 AWG.
What is the operating temperature range for the Ancor Heat Shrink Tubing?
The Ancor Heat Shrink Tubing has an operating temperature range of -40°C to 110°C.
Does the Ancor Heat Shrink Tubing provide strain relief?
Yes, the Ancor Heat Shrink Tubing not only provides an impervious seal to salt water, oil, acids, and sunlight but also provides strain relief.
Jerold –
Britt –
Narissa –
Tawana –
Hope –